Installation; Synchronization Of The Adaptor To The Bluetooth® Headset - Intelbras HA 1000 BT Manual Del Usuario

Installation

To install the telephone adaptor, follow the procedure:
1. Connect one end of the cable that accompanies the adaptor in the Telephone
entrance and connect the other end in the telephone line entrance of the
telephone;
2. Then, connect one end of the telephone line cable in the Line entrance of the
adaptor and the other end in the wall telephone outlet;
3. To finalize the installation, connect the power supply in the mini USB entrance
of the Bluetooth® Adaptor and connect the other end to an electrical outlet.
Synchronization of the adaptor to the Bluetooth® headset
To use the adaptor with the Bluetooth® headset for the first time, it is necessary to
synchronize them. The adaptor has four standard PIN numbers: 0000, 1234, 6666
and 8888.
To know what the PIN of your Bluetooth® headset is, check the headset manual. If the
PIN number of the Bluetooth® headset is one of these four, follow the procedure:
1. Put the Bluetooth® headset in the Synchronize mode, following the manual;
Telephone line
Installation of the adaptor
23