Operation; Taking Out Of Service; Maintenance; Cleaning - Relyon plasma piezobrush PZ2 Manual De Instrucciones

Operation

6 Operation
•
Ensure that the fan grille is not covered so that the device can draw in enough ambient
air.
•
Press the On/Off button to start generating plasma.
While plasma is being generated, do not grab into the working area. This may disturb the
plasma discharge and cause skin irritations and might be slightly painful.
Note!
The plasma generator is not designed to treat metallic or highly conductive substrates.
Such substrates can affect the plasma discharge and reduce the activating power.
Do not use the plasma generator for sensitive electronic components. The plasma
discharge may damage such components under certain circumstances.
7

Taking out of service

•
Press the On/Off button again.
•
Disconnect the power supply once work is complete, if applicable.
8

Maintenance

8.1

Cleaning

Only clean the outside of the plasma generator.
•
Ensure that the plasma generator is disconnected from the power supply.
•
Only clean the plasma generator with a cloth dampened in water. Do not use solvents
to clean the plasma generator!
10