Important Safety Instructions - Epson ELPMBPRH Manual Del Usaurio

Installation Instructions
DISCLAIMER
Milestone AV Technologies, and its affiliated corporations and
subsidiaries (collectively, "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness, or sufficiency of
the information contained in this document.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:
A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING:
Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer's responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING:
Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer's responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer's responsibility to make sure the combined weight of
all components attached to the ELPMBPRH does not exceed
25 lbs (11.34 kg).
• The weight capacity of the ELPMBPRH may be
LIMITED to the lowest weight capacity of any other
components located between the ELPMBPRH and the
supporting structure!
WARNING:
Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING:
Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING:
Do not use this product outdoors.
IMPORTANT ! :
The ELPMBPRH mounts are designed to be
mounted to a 1-1/2" NPT or NPSM following ANSI/ASME
B1.20.1 (Schedule 40, 0.154" minimum thickness aluminum or
steel - ASTM B221) threaded extension column.
NOTE:
The ELPMBPRH projector mounts may be used with
the products noted in Table 1, using the indicated
mounting patterns.
Table 1: Projector Models and Mounting Patterns
Pattern 1 Pattern 2
PowerLite S27 PowerLite 935W
PowerLite X27 PowerLite W16
PowerLite W29 PowerLite 1930
PowerLite 97H PowerLite 1955
PowerLite 98H PowerLite 1960
PowerLite 99WH PowerLite 1940W
PowerLite 955WH PowerLite 1945W
PowerLite 965H PowerLite 1975W
PowerLite 1751 PowerLite 1980WU PowerLite Pro G6470WU
PowerLite 1761W PowerLite 1985WU PowerLite Pro G6570WU
PowerLite 1771W
PowerLite 1776W
PowerLite 1224
PowerLite 1264
PowerLite 1284
VS240
VS340
VS345
NOTE:
ELPMBPRH may be used with ELPMBC02 /
ELPMBC03 / ELPMBC04 columns, ELPMBC04,
ELPMBC05, ELPMBC06 tile kits, and ELPMBP07
ceiling plate.
--SAVE THESE INSTRUCTIONS--
ELPMBPRH
Pattern 3
PowerLite 4650
PowerLite 4750W
PowerLite 4770W
PowerLite 4855WU
PowerLite Pro G6170
PowerLite Pro G6870
PowerLite Pro G6070W
PowerLite Pro G6270W
PowerLite Pro G6770WU
PowerLite Pro G6970WU
3