Button Control; Access The Filehub; One Key Backup; Transfer File By Mobile App - Ravpower PR-WD009 Manual Del Usuario

Button Control

Press to turn on / o the power bank;
Power Button
Press and hold for 4-5s to enable the WiFi of the
Filehub.
Reset Pinhole Press and hold for 5 seconds to reset to factory
settings
WiFi Mode Button Press and hold for 3 seconds to cycle through
2.4GHz / 5GHz / 5GHz & 2.4GHz WiFi modes
SD to USB Press to start copying and backing up data
Backup Button from the SD card to USB HDD
SD Card Slot Support up to 2TB SDXC
USB-C Port Charge the FileHub
Support USB ash and HDD drive data transfer
USB A Port
(FAT32, exFAT, NTFS)
Provide 1A output current to compatible devices

Access the Filehub

1) One Key Backup

1. Turn on the Filehub.
2. Plug into your ash drive/ hard drive and SD card. Wait until the
SD card indicator stops ashing and turns solid on.
3. Press and hold the SD to USB backup button for about 5 seconds
until the SD card indicator ashes again, indicating the Filehub is
reading the SD card.
4. Wait until the SD card indicator stops ashing, so the one-key
backup is completed.
5. Now you can check your backup folder named "SD backup" in
your ash drive / hard drive via the app RAV FileHub.
Note: The original le in your SD card will not be deleted.

2) Transfer File by Mobile App

A. Download the app
Search for the app "RAV FileHub" on Google Play or Apple Store.
Tap the app in the search results and install. (There's no app for
computer or laptop for now; you may access via webpage)
06 / 07