Filling The Tank - Boneco 7142 Instrucciones Para El Uso

Filling the tank

en
Always unplug the unit before removing the
water tank. Do not touch the water in the base
during operation!
To protect health safety and proper humidi-
fier function use only clean, contamination­free,
cold, fresh tap water in your humidifier. If your
water source is contaminated or if you are uncertain of its
safety use distilled water.
Do not operate the humidifier when the water tank is
empty! When the water reaches the minimum level, the unit
switches off the nebulizer function automatically. The red
light comes on indicating tank is empty.
• Remove the water tank from the base and unscrew the
water tank cap (16). Caution: the mist outlet is loose!
• Make sure that no foreign objects are in the water
tank.
• Fill the tank with clean, cold water from the tap (17).
Close the cap of the water tank securely, place the wa­
ter tank onto the base (18). The water is now running
from the tank into the base.
• Do not pour water into the mist outlet of the appliance
(19).
• Insert the plug into the socket and switch on the
appliance using the on/off dial (20). The empty indica­
tor light may stay illuminated for some seconds until
the base is filled with water.
Do not use additives
Water additives (ethereal/essential oils, fragrances,
eucalyptus, water conditioners, etc.) must not be used!
Even a small amount can cause cracks in the material. The
material isn't made for the use of such additives. One drop
is enough to damage the tank and as a consequence the
unit. Any use of such additives will void the manufacturer's
warranty.
10
16
17
18
19
20