Setting The Timer - DAY Useful Everyday 73221 Manual De Instrucciones

16. Music-controlled LED light
17. Volume down
18. Play/pause
19. Volume up
20. Timer
21. Next song
22. Soft colour change
Preparation
Screw the handle to the speaker using the
� nger screws provided.
Charging
Remove the protective cover from the
charging socket (B) on the speaker.
Connect the USB charging cable provided
to a 5V USB charger and connect the USB
charging cable's jack connector to the
charging socket on the speaker.
Allow the speaker to charge for up to 6-8
hours. Once the indicator light turns green,
the speaker is fully charged.
Remove the jack connector from the
charging socket and replace the protective
cover in the charging socket.
Setting up a connection via
Bluetooth
Switch the speaker on using the on/off
button (A).
Press and hold the Bluetooth button (4) on
the remote control until a beep is heard.
The speaker is now visible to your
smartphone (or tablet, etc.)
Select "speakerlighting" on your
smartphone's list of available Bluetooth
devices. You will hear another beep once the
two devices are connected via Bluetooth.
Play music on your smartphone and control
the playback, volume and light eff ects using
the speaker remote control.
Press and hold the Bluetooth button (4) until
a beep is heard to switch off Bluetooth and
the connection between the devices.

Setting the timer

You can get the speaker to switch off
automatically after 30 to 180 minutes.
Press the Timer button (20) on the remote
control one or more times. The set time
is displayed based on the colour of the
speaker's LED light.
Colour
Red
Green
Blue
Yellow
Light blue
Light blue
You can switch off the timer function by
pressing the on/off button or by pressing
both the LED light button (3) and the
Bluetooth button (4) on the remote control
at the same time.
Duration
30 minutes
60 minutes
90 minutes
120 minutes
150 minutes
180 minutes
19
GB