Safety - Snap-On ATC 970S Manual De Instrucciones

Safety

1.0 Safety
The safety precautions must be completely understood
and observed by every operator.
WARNING: THIS MACHINE REQUIRES A SINGLE
OPERATOR, WORKING ALTERNATIVELY IN BOTH
OPERATING STATIONS (A OR B).
T H E O P E R AT O R I S R E S P O N S I B L E F O R
RESTRICTING ACCESS TO THE WORK AREA AND
FOR ANY CONSEQUENCE ARISING FROM USING
THE EQUIPMENT
THE USE OF THIS DEVICE IS ALLOWED ONLY TO
PERSONNEL DULY TRAINED BY AN AUTHORIZED
DEALER.
ANY TAMPERING WITH OR MODIFICATION OF
THIS DEVICE OR ITS PARTS OR COMPONENTS
N O T P R E V I O U S LY A U T H O R I Z E D B Y T H E
MANUFACTURER SHALL EXONERATE THE
MANUFACTURER FROM ANY LIABILITY RESULTING
FROM OR RELATED TO THE ABOVE-MENTIONED TAMPERINGS.
REMOVING OR BYPASSING SAFETY DEVICES
A
OR WARNING LABELS OF THE MACHINE IS A
VIOLATION OF THE SAFETY REGULATIONS.
B
INSTALL THE DEVICE ONLY IN LOCATIONS WITH
NO EXPLOSION OR FIRE HAZARD.
DO NOT USE WELDERS OR GRINDERS AND DO
NOT PRODUCE SPARKS CLOSE TO THE WORK
AREA.
INSTALLATION SHALL BE CARRIED OUT ONLY
BY QUALIFIED PERSONNEL AND WITHIN THE
SCOPE OF THE INSTRUCTIONS PROVIDED IN
THIS MANUAL.
THIS DEVICE IS DESIGNED TO ACCEPT ORIGINAL
SPARE PARTS AND ACCESSORIES ONLY.
CHECK FOR POSSIBLE DANGEROUS CONDITIONS
DURING THE OPERATION OF THE MACHINE. IN
SUCH A CASE STOP THE MACHINE IMMEDIATELY.
IN THE EVENT OF MALFUNCTIONS, STOP
THE MACHINE AND CALL THE AUTHORIZED
DISTRIBUTOR FOR TECHNICAL ASSISTANCE.
DURING USE AND MAINTENANCE OF THE
MACHINE IT IS MANDATORY TO COMPLY
WITH ALL ACCIDENT PREVENTION LAWS AND
REGULATIONS.
10 - EN