Snap-On CENTER POST Manual De Instrucciones página 6

Desmontador automático de neumáticos
Tabla de contenido
P/N: EAL0408G44A
P/N: 8-23562A
6
Safety
Safety Label Meanings
CAUTION: MAKE SURE THAT THE SAFETY
SIGNS ARE ALWAYS CLEARLY VISIBLE
IN THE POSITIONS INDICATED BY THE
MANUFACTURER.
For any reset, use the Part Number (P/N) listed in this
chapter.
EAL0408G44A
Risk of fl ying fragments during beading.
The use of the bead seater device could cause the
ejection of objects and a high acoustic pressure. We
therefore recommend the use of protection equipment
for eyes and ears.
When using compressed air for the beading operation
there is also the risk of the tyre exploding.
Avoid excessive pressure. Do not exceed the maximum
pressure indicated by the tyre manufacturer.
The risk of outbreak also depends on the general
conditions of the tyre and the rim. Check the tyre before
infl ating it.
The bursting of tyres can cause serious injury or death.
8-23562A
Risk of electric shock from live machine.
Do not use equipment with a damaged power cord or
other electrical or mechanical damage until it has been
examined by a service technician authorised by the
manufacturer.
Unplug equipment from electrical outlet when not in use.
Never pull the cord to remove the plug from the outlet.
Grasp plug and pull to disconnect it.
Do not expose the equipment to rain. Do not use on damp
surfaces.
Plug unit into the correct power supply outlet.
Do not remove or bypass the earth connection.
Risk of electrical shock. High voltages are present within
the unit.
There are no user serviceable items within the unit.
Servicing on the unit must be performed by qualifi ed
personnel.
Do not open any part of the unit other than known and
allowed areas.
Turn the power switch off and unplug the unit before
servicing.
Contact with high voltages (e.g.: with the terminals of
the switches, wires and relevant connections) can cause
serious injury or death.
IMPORTANT!! KEEP THESE
INSTRUCTIONS
Tabla de contenido
loading

Tabla de contenido