Access The Video Stream - Axis Q1602-E Guia De Instalacion

AXIS Q1602-E/AXIS Q1604-E Installation Guide
Note:
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually
used; most other parts of the world use 50 Hz. Local variations may apply; always check with the local
authorities.

Access the video stream

The Live View page of the network camera is displayed, with links to the Setup tools, which allow
you to customize the camera.
If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream
in Internet Explorer. You will need administrator rights on the computer to do this.
If required, click the link to install missing decoders.
Note:
To install AMC in Windows Vista and Windows 7, you must run Internet Explorer as admin-
istrator. Right-click the Internet Explorer icon and select Run as administrator.
Setup – Provides all the tools for
configuring the camera to requirements.
6.AXIS Q1604-E: Capture mode is set the first time
the product is accessed. Select the desired capture
mode and click OK. Select the capture mode with the
power line frequency (50 Hz or 60 Hz) used at the
location of the Axis product and click OK. When using
50 Hz, the maximum frame rate is limited to 25 fps.
Help – Displays online help on all aspects of
using the camera.
Page 15