Jump-N-Carry JNC8550 Manual Del Usuario página 4

• T he Jump-N-Carry provides plenty of power for starting vehicles – more than
enough to start most cars and light trucks.
• T he Jump-N-Carry utilizes an ultracapacitor power source, which is largely
unaffected by cold temperatures.
• T he Jump-N-Carry features an internal reserve power lithium battery to power
the ultacapacitor when the disabled vehicle's battery is extremely discharged.
• T he Jump-N-Carry features a status display for the reserve power battery,
allowing you to know its state of readiness for use.
• T he Jump-N-Carry features a 12 Volt input and included extension cord, allowing
you to charge the capacitor directly from a vehicle or other 12 Volt power source.
• T he Jump-N-Carry features convenient side-mounted holsters with cable tracks
for easy cable and clamp management. Always re-wrap cables and re-holster the
clamps after each use.
The unit features a LED status display to alert you to the state of charge of the internal
reserve power lithium battery. Press the Jump Start button to display the battery status
on the gauge.
• 4 lights – fully charged
• 3 lights – 75% charged
• 2 lights – 50% charged – charge soon
• 1 or zero lights – charge immediately
Note: Upon initial purchase, charge the internal reserve power lithium battery until full.
There are options for charging your Jump-N-Carry. First, you can charge the internal
reserve power lithium battery, which can later be used to charge the ultracapacitor when
it is needed for jump starting. Second, you can charge the ultracapacitor directly for
immediate use. Both options are reviewed below:
Charging the internal reserve power lithium battery.
WARNING: Only use the included wall charger. Use of any other charging device
could result in damage to the unit and/or personal injury.
1. C onnect the microUSB end of the supplied wall charger to the Jump-N-Carry via
the micro USB LITHIUM BATTERY CHARGE PORT in the control panel.
2. Connect the wall charger to an AC outlet.
3. Charging progress is indicated by the status LED on the wall charger.
- Red = Charging
Features
Battery Status Gauge
Recharging
- Green = Charge Complete
4