Inglesina otutto Manual De Instrucciones página 24

LIST OF COMPONENTS
1
A FRAME
B FRONT WHEEL ASSEMBLY
C REAR WHEEL ASSEMBLY
FRAME
ASSEMBLY/REMOVAL OF REAR WHEEL ASSEMBLY
2
3 Hook the ring D on the bracket E; then, press the lever
D1 until its complete hooking, making sure that the ring D is
CAUTION: make sure that the wheels are properly hoo-
ked before use.
4
unhook the ring D from the bracket E
free.
ASSEMBLING THE FRONT WHEEL ASSEMBLY
5 Hook front wheels until hearing a CLICK.
CAUTION: make sure that wheels are correctly hooked
before use.
OPENING
6
7 Pulling the handle towards the user, the frame opens au-
8
rear footboard until hearing a CLICK.
9
ked on both sides before use.
FOLDING
10 Press button H and lift the handle.
11 Pulling the handle upwards the frame closes automati-
12 Be sure the lever G
BRAKES
13 To engage the brake, push downwards the lever I positio-
Always engage the brake during stops.
SWIVEL WHEELS
14 Operate both levers L with the foot.
STEP-SKIPPING KIT
15 Operate the rear footboard with the foot to skip small
obstacles.
OBJECT HOLDER BASKET
16 Insert the basket buttonhole on the support and fasten
all the press studs.
CAUTION: maximum allowed load: 3 kg.
CARRYCOT
FITTING THE CARRYCOT TO THE FRAME
17
frame until hearing a CLICK.
CAUTION: make sure that the carrycot is always firmly
engaged before use.
24
INSTRUCTIONS
RELEASING THE CARRYCOT FROM THE FRAME
18 Act on the lever M
handle.
FITTING THE HOOD
20 Wrap the hood around the handle fastening it using the
suitable press studs.
HANDLE AND HOOD ADJUSTMENT
21 To adjust the handle and the hood act on the two lateral
22
D1 and FITTING THE COVER
23
INTERNAL VENTILATION
24
lever N.
REMOVING THE LINING
25 It is possible to remove the lining as shown in the figure.
G. BACKREST ADJUSTMENT
26 Operate the lever O to adjust the backrest: once the desi-
red position is reached, set the lever to the starting position.
SEAT UNIT
-
FITTING THE SEAT UNIT TO THE FRAME
27 The OTUTTO seat unit fits the frame thanks to the EASY
til hearing a CLICK.
CAUTION: make sure that the seat unit is always firmly
engaged before use.
SEAT UNIT FACING THE MUM OR THE STREET
28 It is possible to use the seat unit facing the mum or the
street, and fold the frame with the seat unit fitted in.
RELEASING THE SEAT UNIT FROM THE FRAME
29 Press both handles P
unit from the frame.
WARNING: never fit/release the seat unit from the frame
with the baby inside.
BACKREST ADJUSTMENT
30
push the lever Q to lower the backrest.
FOOTREST ADJUSTMENT
31 Operate levers R to adjust the footrest height.
SAFETY HARNESS
32 Hook the waist straps to the central buckle.
33 Hook the shoulder straps to the rings S.
34
CAUTION: always use the safety harness.
BUMPER BAR ADJUSTMENT
35 Press the buttons T and adjust the bumper bar to the
desired position until hearing a CLICK, which confirms its cor-
rect hooking.
-