Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DMP801
DMP801 SOFTWARE
CONNECTION and START UP
You can control and configure your DMP801 via DMP801 control software on your computer connected to your DMP801.
It is a plug-n'-play mechanism, web settings are not required�
Please download the DMP801 software to your PC from A Systems' web site www�asystems-sys�com�
The DMP801 software will be downloaded as a zipped file "DMP801.rar". Once the download is completed, unzipped the
"DMP801�rar" to a proper destination in your PC�
Follow steps below to make direct connection between your DMP 801 and your computer:
1� Power up the DMP 801 and your computer�
2� Connect the Ethernet port of the DMP801 to the Ethernet port of your computer by commercial CAT5 RJ-45 Ethernet
cable�
3� Flip the PIN 2 of the DIP Switch to ON�
4� Flip the PIN 3 and PIN 4 of the DIP Switch to OFF�
5� Put the rotary switch to position 1�
8
7
English
Capítulos
Tabla de contenido
