How To Set The Unit Id Of Ip Address - SYSTEMS DMP801 Manual Del Usuario

CONNECTION
Connect all necessary input and output devices� Input can be achieved through correctly wired Euroblock connectors�
Euroblock connectors
Balanced
PIN 1: Shield/Ground
PIN 2: Cold (-)
PIN 3: Hot (+)

HOW TO SET THE UNIT ID OF IP ADDRESS

When the PIN2 is set to ON, the host bits (unit ID) of the IP address for DMP801 is set manually by user via the 3rd PIN
and the 4th PIN of the DIP switch�
The leading digit is set by the combination of 3rd PIN and the 4th PIN of the 8-PIN DIP switch and the last digit is set by
the rotary switch�
The configurable range for the first digit is 0, 1, 2 and 3.
The configurable range for the last digit is 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F�
Value
0
1
2
3
to PC audio out
Unbalanced
PIN 1: Shield/Ground
PIN 2: Link to PIN 1
PIN 3: Hot (+)
IP address: 192�168� 0�Xx
8
The 3rd PIN
OFF
ON
OFF
ON
1/4" TRS Phone Jack
TIP: Send
Ring: Receive
Sleeve: Shield/Ground
8
5
DMP801
audio in
upper position: ON
Iower position: OFF
The 4th PIN
OFF
OFF
ON
ON
English