Extension Cable; Powering On/Off - Scosche FLYTUNES BTT Guía De Usuario

Charging FLYTUNES
Use the included USB-C cable to connect
FLYTIJNES to a USB charger or other USB power
source (not included).
A solid Red LED indicates unit is charging. A solid
Blue LED indicates charging is complete.
Connecting FLYTUNES
to AUX Audio Output
Configure the input prongs on
the transmitter for either dual (A)
or single (B) AUX output jack
as shown. Note: For single AUX output
jacks, use the Stereo AUX input prong.

Extension Cable

(for single
AUX output in recessed location)
Plug the Stereo AUX input prong
into the cable as shown. The cable
may be used with the prong in either
the extended or retracted position.
PRELIMARY
™
©
O
A
=- �
��
�
© Th
i
O
Si'-J
�

Powering ON/OFF

Press and hold the MFB (A) for 3 seconds to
power on FLYTUNES. The Blue LED (B) will
blink while power is on. Press and hold the MFB
for 3 seconds to power off the unit.
©
B