Health O Meter 522KL Instrucciones De Uso página 7

ASSEMBLY INSTRUCTIONS (CONTINUED)
1. Carefully remove the contents
of the carton and place each
part on a flat, level, and dry
surface. Remove the 4 column
mounting screws and washers
from the bottom of column and
set aside for assembly step 5.
2. Remove the black adapter
bracket from scale platform.
Place the bracket on the
bottom of the column with the
adapter jack arrow sticker
pointing towards the front of
the column.
3. Place the scale platform on its
side and place the column on
its side, perpendicular to the
platform. The front of the
display head on the column
should be facing forward and
above the scale platform.
4. Locate the load cell connector
cable inside the column and
pull gently until the plug
reaches the bottom of the
column. Carefully pull the
cable connector from the
bottom of the column and plug
into the RJ jack on the scale
platform. Caution: Once
connected, keep a firm grip
on the columns to ensure
the load cell connector cable
is not pulled out from the RJ
jack.
This cable connects the load
cells to the display head and
must be entirely plugged in
for the scale to function
properly.
P/N UM522KL_522KG Rev20190412_web
Screws and washers
RJ Jack
7