Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Use
Warning: Never steam a garment while it is
being worn.
The hose and steam head may become hot
during use. This is perfectly normal. Be care-
ful and avoid any prolonged contact.
• Only operate the steamer on the floor clear of
any materials which may obstruct the base of
the steamer (flat and horizontal surface). Do not
obstruct the openings on the lower part of the
appliance.
• If necessary, expand the poles to the desired
height by unlocking them, pulling them gently
and locking them again. Unlock the four clips
while keeping integrated hanger in your hand.
• Plug in the power cord and turn on the power
using the foot operated pedal. The power light
will illuminate. The steamer is operating.
• Depending on the model the steam amount can
be set to the desired level with the variable
steam control.*
• The unit will produce steam in 60 seconds, when
in max position of variable steam control.
• Put garment onto the hanger head. Grasp the
steam head with the steam vents pointing away
from you. Start steaming by touching material
lightly with steaming head and moving in an
up/down vertical motion. Beginning at the top of
the garment move in a downward direction.
lways steam in a vertical position.
• During use, the hose may make a gurgling
noise. This is a normal occurrence due to
condensation. If you hear the gurgling noise,
hold the hose up to direct the condensation back
into the appliance.
Warning: Do not allow the steamer to run dry.
Warning: Never use the steamer more than
3 hours.
Warning: Do not bend the steam hose during
use or storage.
* epending on the model: these accessories are specific to certain models or available as an option.
7
Tabla de contenido
