NORAUTO HF 1500 Manual De Uso página 134

UTILISATION
Notes:
The Engine Start function may not be
terminated if the battery charger detects that the battery is at full capacity (fully
charged).
The Engine Start countdown process
can be terminated by pressing the Engine
Start Button again to stop the function.
The unit will revert to the Standby mode.
4. When "0" is reached, a beep will
sound. The LCD screen Display will show
the following (The upper digital display
shows the output current that is charging
the battery. The lower digital display
shows "0 sec". The Pump Engine Icon
flashes and the Truck Icon, Clamp Icons
and the Battery Icon will light solid. The
bars on the Battery Icon will change from
empty to solid (bottom to top) repeatedly
and the Arrow Icons will gradually and
repeatedly move downward to the Battery
Icon"), indicating the vehicle is ready to
start.
5. Crank the engine using
manufacturer's guidelines, typically in 3 to
5 second bursts. The lower digital display
shows "0 sec" (a 5-second countdown to
use as a timer when cranking the engine).
6. After cranking, the unit will
automatically adjust the charging current
to 2A for 5 minutes, and then revert to the
Charging Mode previously selected or to
keep the charging current for 2A if there
is no Charging Mode previously selected.
IMPORTANT: The Engine Start function
requires a resting/cooling period between
attempts. Wait 5 minutes before a second
attempt at starting the engine, if needed.
7. When disconnecting the charger, do
so in the following order: Disconnect the
ac plug from the ac mains socket, remove
the negative black (–) clamp from the
negative (marked N or –) post of the
battery OR from the vehicle chassis, and
then remove the positive red (+) clamp
from the battery terminal.
133