Technical Data; Special Safety Instructions; Before Use - DAY Useful Everyday 724801 Manual De Instrucciones

BLENDER
Introduction
To get the most out of your new blender,
please read through these instructions
before use. Please also save the instructions
in case you need to refer to them at a later
date.

Technical data

Voltage/frequency:
Power rating:
Settings:

Special safety instructions

• Always switch the blender off when you
are not using it.
• Do not attempt to repair the appliance
yourself.
• Only use the appliance for its intended
purpose.
• Never pull by the cord, but instead grasp
the plug and pull it out carefully.
• Keep the cord away from hot surfaces.
• If the cord for this appliance is damaged,
it must be replaced at a workshop
speci� ed by the manufacturer, as special
tools are required.
• If the appliance itself is damaged, it
must be taken to a specialist for repair. If
unauthorised alterations are made to the
appliance, the warranty is void.
• Children in the vicinity of the appliance
when it is in use must be supervised.
Keep the appliance out of the reach of
children.
• Do not use outdoors.
• The blender is solely intended for
domestic use and is not suitable for
commercial use.
14
220-240 V ~ 50-60 Hz
350-400 W
2 + pulse function + off
• Always use the blender in accordance
with the instructions.
• Be careful when emptying and cleaning
the blender jug as it contains sharp
blades.
• Be careful when pouring hot contents
into the blender, as it can emit hot steam.

Before use

Take the blender apart and wash the blender,
lid and blade section in warm soapy water.
Dry the parts thoroughly before initial use.
The motor section must not be immersed in
any liquid!
The base of the blender jug is assembled in
the following order:
• clear plastic ring
• blade section
• silicon seal with the collar facing
downwards.
Use
• Make sure the switch is set to 0.
• Place the container on the motor section.
• Carefully � ll the blender jug with the
desired ingredients. Fill a maximum of
1000 ml to avoid over� ows.
• Place the lid on carefully and plug the
appliance in.
• Start the blender by turning the button
to the required position.
2 speeds
0: Stop
P (Pulse): manual pulse function (high
speed)