Safety Information
The below signs might be in the user manual, labeling or other components.
They are the requirement of standard and using.
Symbol for "THE OPERATION
GUIDE MUST BE READ"
Symbol for "COMPLIES WITH
MDD93/42/EEC REQUIREMENTS"
Symbol for "MANUFACTURER"
Symbol for "SERIAL NUMBER"
For indoor use only
The Bluetooth Combination Mark
CAUTION
* Please do read this user manual carefully and thoroughly before use.
* This device is intended for adult use only.
* This device is intended for non-invasive measuring and monitoring of arterial blood pressure. It is not intended for
use on extremities other than the upper arm or for functions other than obtaining a blood pressure measurement.
* Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood pressure. Please start
or end medical treatment basing solely on physician's treatment advice.
* If you are taking medication, consult your physician to determine the most appropriate time for your
measurement. Never change a prescribed medication without your physician's consent.
* This unit is not suitable for continuous monitoring during medical emergencies or operations.
* If the pressure of the cuff exceeds 40 kPa (300 mmHg), the unit will automatically deflate. Should the cuff not
deflate when its pressure exceeds 40 kPa (300 mmHg), detach the cuff from the upper arm and press the
homologous button to stop inflation.
* Please do read this user manual carefully and thoroughly before use.
* Do not use the monitor under the conditions of strong electromagnetic field (e.g. mobile) that radiates
interference signal or electrical fast transient / burst signal, especially when the AC adaptor is applied.
* Do not touch the output of AC adapter and the patient simultaneously.
* The device is not AP/APG equipment. It is not suitable for use in the presence of a flammable anesthetic mixture
with air (or oxygen, nitrous oxide).
* Please keep the unit out of reach of infants or children, since inhalation or swallowing of small parts is dangerous
or even fatal.
* Please use ACCESSORIES and detachable parts specified / authorised by MANUFACTURER. Otherwise, it may
cause damage to the unit or danger to the user / patient.
* The materials of the cuff have been tested and found to comply with requirements of ISO 10993-5: 2009 and ISO
10993-10:2010. It will not cause any potential alergic reaction or contact injury.
* Please make sure the unit functions safely and it is in proper working conditions before use.
32
Symbol for "TYPE BF APPLIED
PARTS"
Symbol for "ENVIRONMENT
PROTECTION – Waste electrical
products should not be disposed
of with household waste. Please
follow local guidelines"
Symbol for "DIRECT CURRENT"
Symbol for "Authorised
Representative in the European
EC REP
Community"
Symbol for "Class II Equipment"
T1A/250V 3.6*10CCC