Important Instructions; Waste Disposal - Workzone ARW-150 Manual Del Usuario

3. RAISING THE FRAME
HANDLE
The handle area is covered with
foam material ⑤. A frame made of
offset sections locks and unlocks the
handle in the vertical as well as the
unfolded position ⑥. By pressing
down on the frame (see figure ⑤
and ⑥) you can raise or lower the
frame until it locks into place.
⑤
4. UNFOLDING THE
LOADING AREA
The loading area consists of two
encapsulated frame sections which
are inserted into each other at
intervals of every fifth length
section. The specially designed
cross-section permits heavy loads to
be carried – even when folded.
When folded the loading area is just
16.5Lx16.1W inches/ 42Lx41W cm.
When unfolded, however, it
increases by 50% to 24.8Lx 16.1W
inches/ 63Lx41W cm. A movable
clamp ⑦ prevents it from
unintentionally pulling apart in the
folded position.
⑥
⑦
IMPORTANT
INSTRUCTIONS
In order to guarantee a long and
fault free lifespan of the cart, it's
important to follow the instructions
below. After assembling the rollers,
please check that every screw joint is
secure.
Should it ever be necessary to loosen
one or more of the screw joints, the
locknuts must be replaced. Since the
inserting sections are covered in a
slight oil film upon delivery, cleaning
with solvents is to be avoided but
instead the oil film should be rene-
wed from time to time. For such a
purpose a lint-free cloth should be
used with a little machine oil and
rubbed over the inner section.

WASTE DISPOSAL

Make your contribution to environ-
mental protection. Dispose of
packaging and end-of-life equip-
ment in line with legal regulations.
Please contact your local community
office for details.
US
User Guide
5