Connecting To Wifi - DAY Useful Everyday 73366 Manual De Instrucciones

Connecting sensors
Open the battery cover on the rear of one of
the sensors. Select a transmission channel
on the channel selector. The sensors must
not be set to the same transmission channel.
Insert the batteries Check that the batteries
are correctly fi tted. All the segments on the
LCD display come on for 3 seconds. Close the
battery cover.
The temperature and the relative air
humidity at the sensor are registered.
The sensor transmits a signal to the weather
station once a minute and the transmission
indicator fl ashes.
Plug the adapter in and connect the
connector from the adapter into the
power connector on the weather station.
The weather station comes on, and all the
segments on the LCD display come on for 3
seconds.
The temperature, the relative air humidity
and the air pressure at the weather station
are registered.
The weather station will now connect to the
sensor. This takes about 3 minutes, and the
antenna symbol in the OUTDOOR area of the
weather station display will fl ash.
Shortly afterwards the temperature outdoors
and the relative humidity outdoors are
shown on the OUTDOOR area of the weather
station's display. If no data is received from
the sensor, "-.-" will be displayed instead.
If you press and hold the DOWN button for 3
seconds, the weather station will resume the
search for the signal from the sensor.
Open the battery cover on the back of the
weather station and insert the batteries.
Check that the batteries are correctly fi tted.
Close the battery cover.
The batteries in the weather display only
function as back-up in the event of a
power cut. If the power from the adapter
is interrupted, the weather station will
automatically lose the WiFi connection.

Connecting to WiFi

You will need a smartphone and the
Livingsense app to connect the weather
station to a wireless network.
Go to the App Store or Google Play and
download the Livingsense app. The app
requires iOS 7, Android 4.3 or later.
Check that your smartphone is connected
to the same wireless network as the weather
station.
Open the Livingsense app and select the
"Pair" function. Select the required wireless
network and enter the access code. Click
"Next" in the app to continue.
Press and hold the WIFI/UP button on the
weather station for 3 seconds until "AP"
fl ashes on the weather station's display. Click
"Next" in the app to continue.
Follow the instructions in the app and go to
Settings, Wi-Fi on your smartphone. Select
LivingSmart in the list of wireless networks.
Go back to the app to conclude the settings.
Once the weather station has connected to
the network, the message "Restart weather
station device please" will be displayed in the
app. Press and hold the WIFI/UP button on
the weather station for 3 seconds until "AP"
fl ashes on the weather station's display.
The weather will now connect to the network
and the time will update automatically.
GB
28