Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Auxiliary connections
The following illustration shows a detail of the auxiliary connections.
There are 5 connectors, each with a specific use:
Connector 0: frequency output connection for grid-connected
-
inverters. Through this connection, the interface sends the RPM
reference of the machine so that the inverter will generate
power according to the F-V power curve programmed.
-
Connector 1: is a connector for RS232 communication. In order to
be able to use it, it is necessary to change the configuration of the
unit.
-
Connector 2: this connector has various functions. From left to
right the connections are:
o
o
Anemometer: this connection allows monitoring of the
wind velocity. In some configurations this connection is
mandatory.
Manual brake: these two wires are to stop the turbine
manually. They perform the same function as the red
Manual Brake button.
25
Tabla de contenido
