Hawke NITE-EYE 2000 Manual De Usuario página 4

RECHARGING
The Nite-Eye 2000 is powered by a 18650 lithium battery. The battery can either be recharged in
the Nite-Eye 2000 unit, or separately if using a battery charger (not supplied).
• To charge the battery while installed in the camera, connect the power adaptor to the USB cable
and insert this into the mini-USB socket on the Nite-Eye 2000, located on the underside of the
unit, beneath the rubber flap.
• The LED charging indicator next to the mini-USB socket will glow red while the battery is
charging and turn off when it is fully charged.
• When recharging from mains power supply the Nite-Eye 2000 will automatically power on. If not
needed, the camera can be powered off by pressing and holding the "ON/OK" button for 3 seconds.
• The Nite-Eye 2000 can also be charged by connecting directly to a computer via USB. In this
mode data transfer will also be available.
MEMORY CARD INSTALLATION
• The Nite-Eye 2000 accepts micro SD memory cards only.
• Memory card capacity between 2GB-32GB only.
• Install the micro SD memory card into the memory card socket located on the underside of the
unit, beneath the rubber flap.
• Install micro SD memory card with exposed contacts first and facing outwards.
4