Errors Shown In Display; Recycling The Product - edenox T-OEM-350 Instrucciones De Instalación, Uso Y Mantenimiento

43
washing.
The machine does not
start with the wash cycle.
Machine does not drain
completely.

6.1 Errors shown in display

ERRORS
ON/OFF LED lights up for 0.5 s and turns off for
E1
2 seconds, repeatedly.
ON/OFF LED lights up twice for 0.5 s each time
E2
and turns off for 2 seconds, repeatedly.
ON/OFF LED lights up three times for 0.5 s
E3 each time and turns off for 2 seconds,
repeatedly.
ON/OFF LED lights up four times for 0.5 s each
E4
time and turns off for 2 seconds, repeatedly.
ON/OFF LED lights up five times for 0.5 s each
E5
time and turns off for 2 seconds, repeatedly.

7. RECYCLING THE PRODUCT

Pressure switch faulty.
Overflow incorrectly mounted.
Door is not closed properly.
Door micro switch faulty.
Machine not levelled correctly.
Pressure switch faulty.
NOTE: If a fault occurs and is not listed in the above table, please call the
technical service. The manufacturer reserves the right to modify the
technical characteristics with prior warning.
DETECTION
The European Directive 2012/19/EU relating to Waste Electrical and Electronic Equipment
(WEEE) states that household appliances should not be disposed of using the normal solid
urban waste cycle. Exhausted appliances should be collected separately in order to
optimise the cost of re-using and recycling the materials inside the machine, while
preventing potential damage to the atmosphere and to public health. The crossed-out
dustbin is marked on all products to remind the owner of their obligations regarding
separated waste collection. For more information relating to the correct disposal of
household appliances, owners should contact their local authorities or appliance dealer.
Call the technical service to replace it.
Mount overflow correctly.
Close the door correctly and if it is seen to re-open
alone, call the technical services to adjust the
tensioneers.
Call the technical service to replace it.
Level the machine In the event of doubt, please
contact your technical service.
Call the technical service to replace the pressure
switch.
DENOMINATION
Door or hood is open.
Incorrect water level. Stipulated fill time
exceeded.
Incorrect drainage of the machine Stipulated
drainage time exceeded.
Incorrect boiler temperature. Stipulated boiler
heating time exceeded.
Incorrect tank temperature. Stipulated tank
heating time exceeded.