Led Indicators And Their Actions; Led States - iStorage DISKASHUR M2 Manual Del Usuario

1. LED indicators and their actions

LED LED State
RED Solid
RED Double blink
GREEN Solid
GREEN Blinking

2. LED States

Note:
The normal function of the diskAshur M
power cycle the product (power off then power on) to resume normal operation. If normal operation does not resume,
please use the product in a different location.
To wake from Idle State
Idle state is defi ned as when diskAshur M
To wake diskAshur M from the idle state do the following.
2
Connect the diskAshur M 2
port on your computer
To enter Idle State
To force diskAshur M to enter Idle State, execute either of the following operations:
2
• Disconnect the drive if connected to a USB port, all LEDs will switch off (idle state).
Power-on States
After the drive wakes from the Idle State, it will enter one of the following states shown in the table below.
Power-on State LED indication
RED
Initial Shipment State
Solid
Standby RED
Reset RED
#6
Description
Locked drive (in either
Standby or Reset states)
Incorrect PIN entry
Drive unlocked
Data transfer in progress
is not being used and all LEDs are off.
2
to a powered USB
Encryption
Key
and GREEN

Solid

Solid

LED LED State
BLUE Solid
RED, GREEN
BLUE Blinking
together
GREEN and
Blinking together
GREEN and
Blinking alternately
may be disturbed by strong Electro-Magnetic Interference. If so, simply
2
RED, GREEN and BLUE
LED blinks twice and fi nally switches to a solid
the drive is in Standby State
Admin
Description
PIN
Waiting for confi guration of an Admin PIN (First Time Use)

Waiting for Admin or User PIN entry

Waiting for confi guration of an Admin PIN

www.istorage-uk.com
Description
Drive in Admin mode
and
Waiting for User PIN entry
BLUE
Waiting for Admin PIN entry
BLUE
Authentication in progress
LEDs blink once in sequence then the
RED LED indicating
GREEN