Cleaning The Dispensing Cap - winefit One Manual Del Usuario

CLEANING THE DISPENSING CAP

Once all the wine in a bottle has been dispensed, the dispensing cap assembly must be
washed to remove residues of the wine and any incrustations which may damage the cap.
Rotate the cap top while holding the inner collar or both
collars in place, and remove. Hold the outer collar in
place and unscrew the inner collar.
Once the dispensing cap and collars have been
removed from the wine bottle, proceed as explained
below:
Rinse the wine bottle repeatedly with clean potable
water until all solid and liquid residues are removed.
Fill the rinsed bottle with clean potable water to ½ full.
NOTE: we recommend keeping one rinsed bottle on hand for use in later dispenser cap
cleaning operations.
OK!
OK!
ENGLISH
 Slip the outer collar over the neck of the wine bottle.
NO!
 Place the inner collar on the neck of the wine
 Slide the inner collar up until the striker edge
NO!
bottle, checking that the striker edge is below
the drip bead.
comes into contact with the lower edge of the
drip bead.
Screw the outer collar onto the
NO!
47
inner collar until both
collars are firmly locked
underneath the bead and
cannot move either
downward or upward.