How To Insert The Gas Bottle - winefit One Manual Del Usuario

HOW TO INSERT THE GAS BOTTLE

This appliance is designed to use a single type of gas bottle authorized by the
manufacturer. Use of any other gas bottle will invalidate the warranty and can make the
appliance unsafe. The gas bottle may contain one of three types of pressurized gas, according
to need. The available gases are nitrogen, argon, and an argon + carbon dioxide mixture.
Due to the high initial pressure (110 bar), the gas bottles must be handled with care and
kept away from sources of heat.
The appliance may be delivered with the first gas bottle already inserted.
ENGLISH
 With the appliance switched on, remove the gas bottle
cover.
 With the appliance on and the red LED
insert the gas bottle and screw it down onto the fitting; carry
out this operation accurately and rapidly. NOTE: FOR
CORRECT BOTTLE TIGHTENING, screw the gas bottle
down into its seat until the red LED
Once the red LED has gone out, rotate the bottle about
1/8 turn more. WARNING: screwing down by more than
1/8 turn may damage the gas bottle gasket.
 The display will read the scrolling text: Insert
bottle to continue. Until 35 days
of guaranteed quality
Insert bottle.
 Replace the gas bottle cover.
39
WINEFIT one
®
WINEFIT
lighted,
goes out.