Installation Examples - Kathrein EXI 01 Guia De Inicio Rapido

Info on the coaxial distribution system
Ideally the EXI 01 modem is operated in combination with the EXI 3508 multi-switch with integral modem. The terrestrial
distribution system of this multi-switch is specially matched to this application and thus offers especially long range
capabilities for the installation (> 700 m for the data range). An integral high-pass fi lter for the terrestrial input prevents
undesirable propagation of your network data from a connected antenna.
Operation with a conventional multi-switch also poses no problems. In this case the EXI 90 external high-pass fi lter must
be screwed on to the terrestrial input, in order adapt the terrestrial distribution system.
To achieve optimum performance, make sure that all components of the overall distribution system (including the outlets
used) support the frequency range of 5 to 68 MHz.
Overview of the LEDs
"Power" LED
"Coax/Link" LED
Ethernet socket
Left hand LED
Right hand LED
Overview of buttons
Pairing Pressed briefl y (1-3 seconds)
Pressed longer (approx. 12 seconds)
Reset Pressed briefl y (1-3 seconds)

Installation examples

Connection to a receiver and remote feed to the modem by
the receiver
EXI 30
LED ...
Lights up green
Lights up red
Is off
Lights up green
Lights up orange
Lights up red
Is off
Flashes orange
Lights up green
Is off
Button is ...
Hi-fi system
Status EXI 01
in operation
Stand-by
No power supply
Connection established in the coax network (optimum
connection)
Connection still OK
Bad connection - data throughput restricted
Damping too high (> 90 dB), cable breakage or no matching
network key
Ethernet activity
GBit connection
at ≤ 100 MBit connection
Triggers the following action ...
A further modem is connected
Modem is prepared for connection into a private network.
Network key is deleted
Reset to factory setting. The factory setting for the network
key is restored
Connection to a laptop/PC and power supply to the modem
by power supply unit
EXI 30
3 / 8