Configuración Del Procesador - Dell EMC PowerEdge R440 Manual De Instalación Y Servicio

Option Description
NVDIMM-N Read- Enables or disables the read-only option for the NVDIMM-N. If set to Enable, all NVDIMM-N is forced to read-only.
Only Read-only is intended to be for debug or maintenance when customers would like to access the NVDIMM-N data
and also to lock it from being updated. This option is set to Disable by default.
NVDIMM-N Enables or disables clearing data on the NVDIMM-N. If set to Enable, all data on the NVDIMM-N is lost. This
Factory Reset and option is used to remove data on the NVDIMM-N, repurpose your system. This option is set to Disable by default.
Secure Erase All
Dimms
NVDIMM-N Enables or disables interleaving on NVDIMM-N. Volatile RDIMM interleaving policy is not affected by this option.
Interleave This option is set to Disable by default.
Battery Status Indicates if the NVDIMM-N battery is ready. Battery Status can display one of the following states:
•
•
•
The following settings are applicable for every NVDIMM-N present in the system.
NVDIMM-N Specifies the location of the NVDIMM-N in each channel.
Memory Location
NVDIMM-N Specifies information on the capacity of the NVDIMM-N.
Memory Size
NVDIMM-N Specifies information on the speed of the NVDIMM-N.
Memory Speed
NVDIMM-N Specifies information on the current firmware version on the NVDIMM-N.
Memory Firmware
version
NVDIMM-N Specifies information on the serial number of the NVDIMM-N.
Memory Serial
Number
NVDIMM-N Enables clearing data on specific NVDIMM-N and results in loss of data on that specific NVDIMM-N.
Factory Reset and
Secure Erase
Configuración del procesador
Puede usar la pantalla Processor Settings (Configuración del procesador) para ver la configuración del procesador y realizar funciones
específicas, como la habilitación de la tecnología de virtualización, el precapturador de hardware, y la inactividad lógica del procesador.
Ver Processor Settings (Configuración del procesador)
Para ver la pantalla Processor Settings (Configuración del procesador), siga estos pasos:
1 Encienda o reinicie el system.
2 Presione F2 inmediatamente después de ver el siguiente mensaje:
F2 = System Setup
NOTA: Si el sistema operativo comienza a cargar antes de presionar F2, espere a que el system termine de iniciar,
reinícielo systeme intente nuevamente.
3 En la pantalla System Setup Main Menu (Menú principal de la configuración del sistema), haga clic en System BIOS (BIOS del
sistema).
46 Aplicaciones de administración previas al sistema operativo
Present-Ready
Present-Offline
Not-Ready