Controlling The Pt Camera With An Nvr - Lorex LNZ3522B Manual De Instrucciones

7 Controlling the PT Camera with an
NVR
The camera can accept Pan-Tilt commands directly through the
Ethernet cable. There is no need to run special wiring to control the
movement of the camera.
Note
• The following instructions are based on the Lorex LNR400 Ser-
ies NVR. See your NVR's instruction manual for instructions on
controlling the PT camera with your system.
• For the latest list of compatible NVRs, please visit
www.lorextechnology.com/support.
To connect the camera to the system:
1. Connect the camera to your NVR as detailed in 5 Connecting the
Camera, page 6.
2. Right-click and click Main Menu. Enter the system user name
(default: admin) and password (default: 000000) if prompted.
#; r. 1.0/19290/19290; en-US 17