General Description - ROBBE Power Peak QUAD EQ-BID Manual Del Usaurio

2.

GENERAL DEScRIPTION

The Power Peak ® Quad EQ-BID is an intelligent battery charger with convenient battery
management for charging and discharging NC, NiMH, lead and lithium rechargeable
battery packs.
Additionally, it features a built-in equalizer.
The Power Peak ® Quad EQ-BID is used to charge or discharge 1 to 14 cell NC or NiMH
battery packs both in automatic mode with automatic current adjustment as well as in
manual mode. The Delta-Peak Cut-Off method is used to switch off the device when the
battery is fully charged.
Likewise, up to 6-series connected lithium cells can be charged with a maximum current
of up to 5 amps. The Cut-Off is made automatically when the battery reaches its fully-
charged voltage. It is also possible to automatically charge lead batteries from 2 to 12 Volt.
10 internal memory storage locations allow you to store battery-specific data for char-
ging and discharging up to ten different batteries in manual mode.
The main feature of the Power Peak ® Quad EQ-BID is the future-proof
battery identification system (BID). As the variety of different batteries is
becoming ever more diverse, each type of battery requires its "own", indi-
vidual charging process. It is easy to set up the charger incorrectly for a
specific type of battery, resulting in costly damage to the battery.
The revolutionary BID-System from robbe offers an ingenious solution to
overview of the current battery status. To provide the battery condition.
Operating Instructions
Power Peak ® Quad EQ-BID
this problem. A small, lightweight BID chip is fitted to each
battery. It stores all the relevant data for the optimum charging
or discharging of the battery; when the BID chip attached to
the battery is connected to the Power Peak ® Quad EQ-BID,
the BID system transfers the relevant battery charge parame-
ters to the charger itself.
Simply press the 'Start' button, and the charge or discharge
process begins. No tiresome searching through menus for the
set-up parameters, maximum protection from mishandling,
and storing of the relevant battery data in the BID chip - those
are the unique advantages of the BID system.
By storing the most important data in the BID chip/key, all the
data required for safe, optimum charging and discharging is
always "on board" the battery, which can be easily displayed
on the charger itself. This function means that PC software
and computer technology are no longer required to obtain an
5
Order No.
8565