Preparing Coffee With Pre-Ground Coffee (Instead Of Beans); Delivering Hot Water; Rinse Function; Changing The Quantity Of Hot Water - Fulgor Milano F7BC24 Series Mantenimiento

10 - Preparing coffee with pre-ground coffee (instead of beans)

• Press the (B4) icon (B4) (fig. 8) and select the pre-
ground coffee function.
• Extract the machine by pulling it outwards using the
handles (fig. 7).
• Lift the central lid, place one measure of pre-ground coffee
in the funnel (fig. 19), push the appliance in then proceed
as described in the section "Making coffee using coffee
beans".
N.B.: You can make just one coffee at a time by pressing
the icon (B10) (fig. 12).
• After using the machine with pre-ground coffee, to go
back to making coffee using beans, deactivate the pre-
ground coffee function by pressing the
8).
• Always make sure the appliance is ready.
• Place a container under the hot water spout (fig. 5).
• Press the icon (B13) (fig. 20). The appliance displays:
"HOT WATER PRESS OK". Press the OK icon (B9) again
and hot water is delivered from the cappuccino maker
Press the button (B3) to start the "rinse" function. Press the
key (B6) to cancel the function at any time.
The machine is set by default to automatically delivery 200
ml of hot water.
To change these quantities, proceed as follows:
• Place a container underneath the cappuccino maker (fig.
5).
• Press the (B2) to enter the menu (fig. 15) or press the
icons (B7) and (B8) (fig. 2) until "PROGRAM HOT
WATER" is displayed.
• Press the OK icon (B9) to confirm.
NOTE 1: Never introduce pre-ground coffee when the
NOTE 2: Never add more than 1 measure, otherwise the
NOTE 3: Use the measure provided only.
NOTE 4: Introduce only pre-ground coffee for espresso
NOTE 5: If more than one measure of pre-ground coffee is
icon (B4) (fig.
into the container underneath. (You should not deliver hot
water for more than 2 minutes at a time). To interrupt,
press the
The appliance stops delivery once the set quantity is
reached.

13 - Changing the quantity of hot water

• Select the required quantity of water by pressing the
icons (B7) and (B8). The progress bar shows the quantity
of water selected.
• Press the OK icon (B9) to confirm (or the
cancel the operation.
• Press the
menu.
• The appliance is now reprogrammed with the new settings
and is ready.
machine is off or it could spread through the
inside of the appliance.
appliance will not make the coffee.
coffee machines into the funnel.
used and the funnel clogs, push the coffee down
with a knife (fig. 21) then remove and clean the
brewing unit and machine as described in the
"Cleaning the brewing unit" section.

11 - Delivering hot water

icon (B13) or the icon (B6).

12 - Rinse function

(B6) icon (B6) (fig. 18) twice to exit the
EN
icon (B6) to
17