DJI SPARK Guía De Usuario página 6

Using the Charging Hub
Follow the instructions below to use the Charging Hub. Example:
Spark Battery Charger (F1C50 Version 2).
1. Connecting to a Power Source
Connect the Spark Battery Charger to a power outlet (100-240V 50-
60Hz), then connect the Charging Hub to the Spark Battery Charger.
2. Connecting the Batteries
Align the battery with the Battery Slot Track and put the battery in as
shown below. Then push the battery in to make it properly inserted.
The Charging Hub will intelligently charge batteries in sequence, or
even simultaneously, based on their power levels and cell voltage for
efficient, optimized charging. It is normal that there are one or more
batteries being charged at the same time due to differences in power
levels, battery cell voltage, and battery temperature. Please check
the Status LED to monitor charging.
Refer to "Status LED Indicator Descriptions" for more information
about the Status LED indicator's blinking patterns. The Battery
Level Indicators will turn off when charging is complete. Detach the
batteries from the Charging Hub.
1
2
4