Tabla de contenido
The gearbox can be supplied with or without optionals (oil cooler, flexible coupling, brackets, trolling
valve).
Gearboxes are supplied without oil.
Fig.4
POS.
DESCRIZIONE
1
Temperature plug M 16x1,5
2
Oil pump
3
Output shaft
4
Net filter
5
Drain plug
6
Rear half housing
7
Front half housing
8
Oil dipstick and filling
The gearbox must be filled with oil and the oil level checked before use. (see MAINTENANCE section)
Using the gearbox with insufficient oil could damage the gears.
Too much oil could cause leakages through the gaskets and breather and considerably increase the
running temperature.
Under normal conditions, the drive should be reversed when the engine is idling.
In emergencies, the drive can be reversed with the engine running at maximum speed.
Repeatedly reversing the drive with the engine running at maximum speed will considerably
shorten the life of the clutches
Make sure the engine and propeller are at a standstill before carrying out any kind of operation
on the gearbox.
Plus d'informations sur : www.dbmoteurs.fr
ZF 304 A - ZF 304 C
POS.
9
10
11
12
13
14
15
16
7
DESCRIZIONE
Breather cup
Heat exchanger
Plug M 14x1,5
Identification plate
Control valve
Comand level
Main preassure plug (MA RM 1/8 NPTF)
Oil filter
GB
Tab. 1
Tabla de contenido
