Thompson DSC-925W Manual Del Usuario página 39

MOTORISED 1080P IP WI-FI CAMERA
All of your camera settings can be accessed remotely
by right clicking on the name of the camera in the
list (or on the image that it displays) then clicking on
"Paramètres caméra [Camera settings]":
• Status menu: shows you the current status of
the camera: fi rmware version, user name, main
functions activated, last operations performed.
• Basic settings let you set the camera name
and time, which can be embedded into the
video of the camera.
:
• Network gives you access to all the settings
related to network use: IP confi guration, WiFi
confi guration, with the option of switching the
camera from a wired to wireless connection,
ports used, email alert settings, FTP server
access and plug and play access settings.
• Video: gives you access to all the settings
for camera video management: resolution,
number of images per second, night vision
operation, confi guration of photos taken by
the camera, contrast, brightness, etc.
• Detector: here you can activate and confi gure
the movement detection function and the
actions to be launched if intrusion is detected.
• PTZ (compatible cameras only): here you will
fi nd all of the settings linked to camera motor
management if it is fi tted.
• System: enables you to reset the camera or
restart it.
When a camera displays its image on the screen,
additional commands are displayed in the bottom
right corner:
1 2 3 4 5 6
D - CONFIGURATION AND USE
1
This icon shows the presence of records on
the computer used (white when idle, green
when programmed/on
records are created)
Broadcast stopped and image closed
2
Start a recording on the disk of the
3
computer used*
Activation/deactivation of the camera
4
microphone (cameras fi tted with the
microphone only, your computer must provide
the speakers)
Take a photo and store it on the hard drive
5
of the computer used*
Activation/deactivation of the camera
6
speaker (cameras fi tted with the speaker
only, your computer must provide a
microphone)
* For the save and capture functions to be
accessible, the disk to use must be set beforehand.
Click on the System settings icon
software where to save the photos and videos on
the computer hard drive.
To view videos saved on the computer, client on the
Video playback icon
www.thomsonsecurity.eu
10 11
1 2 3 4 5 6
detection/manual
to tell the
:
9
7 8 14 13 12
15
EN EN