Configuration Using Thomview Software - Thompson DSC-925W Manual Del Usuario

MOTORISED 1080P IP WI-FI CAMERA
2 - CONFIGURATION USING THOMVIEW
SOFTWARE
The ThomView software is compatible with PC and
Mac OS and confi gures and manages one or more
cameras connected to the same local network. On
another network, it enables remote access to the
camera image.
ThomView software is available for downloading
from our website:
http://www.thomsonsecurity.eu/docs.
php?lang=FR&type=5&ref=512493
• Install then run the software on your computer:
The ThomView software asks you for a user name
and password to connect: the default user name is
"admin" and there is no password.
Important note: this user name and password is not
the same for your camera. They are specifi c to the
ThomView software and prevent shut-down of the
software by unauthorised persons, for example.
The main software window opens:
1 2 3 4 5 6
12
7 8 9 10 11
13 14
D - CONFIGURATION AND USE
1 Add a new camera
Software settings
2
Access to videos saved on the computer
3
Access to the operations log in the
4
software
Selection of the number of cameras on the
5
screen at one time
Previous page
6
Next Page
Go to full screen
7
Launch a patrol (compatible
8
cameras only)
Cut the image display for
9
all of the cameras
Date, current time, processor load and
10
hard disk use
11
List of cameras saved to the software
Display frames for camera images
12
Controls available for the selected
13
camera
Display of direction and zoom
14
controls (compatible cameras only)
www.thomsonsecurity.eu
The software can manage
up to 64 cameras: these
arrows let you switch from
cameras 5 to 8 then 9 to
12, etc.
13
EN EN