Adjusting The Flow - Kramp GOPART FGP455239GP Manual Del Usuario

OPERATION INSTRUCTIONS

ADJUSTING THE FLOW

1. You can move up the handle to adjust the spreader setting by following the
direction of the arrowhead. When the handle moves up to "30", the adjustable
plate is fully open, when it goes to "0", it's fully closed.
UK
2. Loosen the wing nut on the Bracket and move the adjustment lever handle up
or down depending on the amount of material required. Pushing the handle
down will release more material and pulling the handle up will stop the flow
entirely.
3. Tighten the wing nut when the desired position is reached.
12
Adjust the handle fol-
lowing the arrowhead
Adjust the handle to make sure the adjusting plate is fully
open or closed. If not, please loosen the 2 bolts in the
pictures and push the handle to the "0" position, then
remove the bracket a little to make sure the adjusting plate is
fully closed. Then tighten the 2 bolts.
When the handle moves to
30, the adjustable plate is
fully open.
When the handle moves to 0,
the adjusting plate in the hop-
per is fully closed.
direction.