Munchkin MK0036 Manual Del Usuario página 3

INSTRUCTIONS FOR USE
SAVE FOR FUTURE REFERENCE
• Place unit on a flat surface away from the reach of children.
• Preheating of the appliance is not necessary.
• The appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to modify the plug in any way.
• A short power-supply cord (or detachable power-supply cord) should be
used to reduce the risk resulting from becoming entangled in or tripping
over a longer cord. Longer detachable power-supply cords or extension
cords are available and may be used if care is exercised in their use. If a
longer detachable power-supply cord or extension cord is used:
1. The marked electrical rating of the cord set or extension cord should be at
least as great as the electrical rating of the appliance; and
2. The cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
To Warm Bottles or Baby Food:
To warm your baby's bottle or food, please follow the instructions in
the chart on page 6.
Note: These instructions are to be used as a guide only. Please
note that there are many variables, such as size of the bottle,
ambient temperature, and starting temperature of the food,
which can impact the speed as well as
the final temperature at which this unit
1.
warms the bottle or jar. Adjustments to
the instructions below may be necessary.
Always test the temperature of food
before feeding baby.
1. Make sure that the unit is unplugged from
the wall outlet. When ready to begin, remove
2.
Water Reservoir from its holder and fill it with
water. Filtered or bottled water will help reduce
the possibility of mineral deposits or limescale
build-up on the heating element. fill the unit
with water via the Water Reservoir only. Never
4
CCD-0024-000 REV 5
pour additional water into the Warming Chamber
as it can overflow outside the unit and create a
shock hazard. The Water Reservoir does not need
to be filled before each use. You need to fill the
reservoir only when it is empty.
2. In a rapid motion, place Water Reservoir
back into the bottle warmer.
3. Always place Lift-Out Basket inside Warming
Chamber before positioning your bottle or jar.
Never place bottle or jar in Warming Chamber
without using the Lift-Out Basket. Bottle / jar
could be damaged or overheated.
4. Place bottle or jar into warmer. Make sure
bottle or jar does not contact the sides of the Lift-
Out Basket to allow the passage of water vapor.
5. Place Adapter Ring on top of the Lift-Out Basket.
If the Adapter Ring does not fit loosely around the
bottle or sit flat on top of the Lift-Out Basket, do not
use. plug the unit into the wall outlet.
6. plug the unit into the wall outlet. press the
on/off button once to turn the unit on. set the
time to the desired duration using the guide
on the guide on page 6 as a reference. use
the Increase Time and Decrease Time buttons
to add or subtract time. Press the start button
to initiate the heating cycle. unit will beep 3
times to indicate the warming cycle is complete. The heater will shut off
automatically. Remove the bottle / jar at once so that it will not continue
heating. *Many variables affect the functionality of this product, such as;
ambient temperature, shape of the bottle or food jar, temperature and
volume of the contents. Therefore, it is imperative that you check the
temperature of the contents before giving them to the child. This can
be done by shaking or stirring the contents first, then tasting the food or
placing it on the inside of your wrist to ensure that it is the appropriate
temperature for your baby. Allow at least 3 minutes for the unit to cool
before next use. Digital memory timer automatically remembers the last
timer setting.
3.
4.
5.
6.
5
CCD-0024-000 REV 5