Inserting Batteries - Seac T5 Instrucciones

INSERTING BATTERIES

• Unscrew the aluminum cap at the end of the handle, turning counter-
clockwise.
• Insert the AAA batteries in the container, making note of the polarity: the
side with the springs is the negative pole (-).
• Insert the battery container into the torch, making sure that the positive pole
(+) is pointing into the torch. To prevent mistakes, follow the direction shown
by the insertion arrow etched into one side of the battery container.
• Grease the sealing O-rings with a layer of silicone grease.
• Screw the aluminum terminal at the end of the handle back on, turning
clockwise.
Failure to fully tighten this cap could result in water leaking into the torch
during use.
• Check that the torch switches on using the switch.
If the batteries are inserted incorrectly (inverted polarity), a short circuit
will be created, causing irreversible damage and a risk that the torch
could explode.
SWITCH
The T5 torch has an on/off system operated by a mechanical pressure switch:
to turn the torch on and off simply press the button once.
ENGAGING OR DISENGAGING THE SAFETY
The torch features a simple but effective safety system, designed to avoid
switching on the torch accidentally.
Attached to the torch strap there is small fork shaped tool. When this tool
is inserted into the special slot on the button, it will prevent the button from
being pressed accidentally and switching on unintentionally.
14
797 - Manuale Seac torce serie T5 - TOTALE.indb 14

WARNING

WARNING
12/09/2018 14:36:52