Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IV. Initial setup
1.
Start by installing the two AAA batteries supplied inside the remote control.
2.
Next, insert the left and right satellite speaker plugs into the matching output jacks on the back of
the main unit.
3.
Connect the left (white) and right (red) RCA plugs into the matching input jacks on the back of
the main unit for wired playback from audio devices fitted with a stereo 3.5mm jack. Proceed to
connect an external audio device, such as a laptop, television set, MP3/4 player, smartphone or
tablet.
4.
Plug the AC cable into a wall outlet.
TV
Computer
DVD/CD
Ipod/MP3
Notebook
5.
Turn on the speaker by turning the main power switch on the back of the unit to its ON position.
After that, the user can also press the red power button on the remote control to toggle between
active and standby modes.
6.
Select the input mode using the source button on the main unit or by pressing the corresponding
button found on the remote control. The available modes are:
USB: enables audio playback from compatible files stored in a USB memory stick.
SD
: enables audio playback from compatible files stored in a
TM
Bluetooth
®
: enables the streaming of audio wirelessly from compatible devices.
Aux: enables audio playback from devices fitted with an auxiliary 3.5mm.
Tuner: allows the selection of channels as the input source on the speaker.
7.
Using the controls on the front of the main unit or the remote, you can manage and select your
tracks, mute the speaker audio, in addition to adjusting the bass and treble control to the desired
level.
8.
If you do not intend to use the speakers for a long time, set the power switch to its OFF position.
SD
TM
memory card.
V. Advanced operation
Wireless Bluetooth
mode
®
Bluetooth
technology enables the streaming of audio wirelessly from compatible devices that
®
comply with the A2DP standard.
If your
Bluetooth
device supports Near Field Communication (NFC), make sure this feature is
®
activated.
Pairing the speaker with your Bluetooth® device
1.
First switch the speaker on from the standby mode using the power button
front of the unit or on the remote control, if you haven't done so already.
2.
Place both devices not more than one meter away from each other.
3.
Enable the
function on your audio device and set it to discover the wireless
Bluetooth
®
speaker.
4.
Press and hold the BT button on the speaker or on the remote control. The bt icon starts
blinking fast to indicate that the system has entered into the pairing mode.
5.
For mobile devices that are NFC-capable, simply place it close to the sensor located on the
top section of the subwoofer, to instantly establish a
one-step pairing configuration.
6.
Once the speaker appears listed under the newly found
ask if you want to pair with it.
7.
Accept by pressing Yes or Ok. If you have a lower
to enter the passkey 0000 (4 zeros).
8.
If pairing is successful, two short beeps will be generated, making the LED indication glow
steady on the screen.
9.
If after 60 seconds the pairing process fails, please repeat steps 1 through 8 described above.
found on the
Bluetooth
connection, in a convenient
®
Bluetooth
devices (KWS-640), it will
®
Bluetooth
version, you may be prompted
®
Tabla de contenido
