FenSens FENEU1 Manual De Usuario página 31

recommend connecting only up to 2 FenSens devices (Front And Back)
to 1 vehicle on one user account.
22.
Trouble Adding Two Sensors?
FenSens is designed to have 2 devices on 1 car (front and back)
or with one mobile phone or user account. You can place multiple
devices on other cars, but we would recommend a separate mobile
phone or user account to be used with each car that has devices on it.
This is so FenSens can properly tell that you back sensor on car #1 is
different than the backup sensor on car #2
23.
I Don't Want To Mount The TAP Button On My Steering Wheel
The TAP button can be taken out of its included holder and placed
anywhere in the vehicle. Carefully pinch the bottom ring of the button
holder to loosen the top, then carefully pop the button out of the
holder. Use the included 3M tape from the screw kit to mount the
button anywhere you would like in the car.
24.
I'm Not Receiving Audio Alerts Or TAP Button Notifications
If your app is saying the device is in "Sleep Mode", it means the device
is not connected to the app. This could be one of several issues, but
typically it's because your Bluetooth setting is off or you are out of
range of your device.
Here are some troubleshooting tips if you suspect a bigger issue.
When the app is not connecting to device after paired, it may have
one of the problems below:
1.
App problem: App can not connect to device. (Try to reboot the App
and/or the phone itself.)
2.
Device problem: The device can't connect. (Try to re-power the
device).
29