Adjusting Sensor Positions - FenSens FENEU1 Manual De Usuario

ADJUSTING SENSOR POSITION
The sensors can be adjusted up or down if you need them to be. We
recommend this if your plate is higher than 90cm off the ground or you
are concerned about catching low hanging objects, such as curbs. Please
adjust the sensors to a position you are comfortable with using the flat
ground as a reference. You do not want the sensors to be hitting the
road and providing false readings.
The screw holes can be identified in the image below. Be sure to use
the special tool that's included with your kit to unscrew and adjust the
sensors up or down. Tighten the special sensor screws after making an
adjustment so they do not change position while in use on your vehicle.
Sensor adjustment screws
1.5mm
12