Niko 16-601 Manual Del Usuario página 53

MODULES
2. Blocking an entrance card
Hold the corresponding shadow card in front of the reader. You hear 2 beeps. Hold the entrance
card in front of the reader. You hear a long beep. The lock is no longer activated.
3. Reactivating a blocked entrance card
Hold the ENROLMENT CARD in front of the reader to reactivate a blocked entrance card. You hear
a beep for 30s. Hold the entrance card that has to be reactivated in front of the reader within 30s.
You hear 4 short beeps. The entrance card has been reactivated.
4. Resetting the card reader
- Hold the ENROLMENT CARD in front of the reader. You hear a beep every 1s.
- Hold the RESET CARD in front of the reader twice.
- Hold the ENROLMENT CARD in front of the reader.
- Hold the RESET CARD in front of the reader twice.
- You hear 3 beeps in confirmation.
- Wait for 5s until you hear a beep.
- Hold the ENROLMENT CARD in front of the reader again. You hear 2 short beeps in confirmation.
The card is reset.
All cards have been reactivated.
5. Activating a new folder with cards
In order to activate a new folder with cards, proceed as follows:
- Enter the system's programming mode by holding the old ENROLMENT CARD in front of the reader.
- Every 1s, you hear a beep for 30s.
- Hold the new ENROLMENT CARD in front of the reader within 30s.
The new folder with cards has been activated and is ready for use.
6. Deactivating the beep signal
Every time a user holds his valid card in front of the reader, you hear a beep. You can deactivate
this beep by means of the SILENT CARD. Every time you hold the card in front of the reader,
the beep is activated resp. deactivated. When the beep is deactivated, you do not hear a beep in
confirmation, when it is reactivated, you hear 2 short beeps in confirmation.
9.4. Technical data
Dimensions: ................................................. L 100 x H 50 x W 80mm
Weight:........................................................ 338g
Operating temperature: ................................ -20 to 70°C
Enclosure: ................................................... aluminium (enamelled)
Protection against dust and water: ................ IP44
Connector: ................................................... 34-pole: connection to other modules
Max. # electronic keys: ................................. 10.000
SELV-tension
EN 53