Niko 16-601 Manual Del Usuario página 45

MODULES
Notes:
- Use terminal resistor: You always have to activate 2 terminal resistors in an installation (= dip
switch 4 switched to ON): 1 in an addressable bell push button and 1 in a 16-651. If the installation
contains several external units, activate the terminal resistor in the farthermost external unit. For
the video switcher, connect the 16-651 with activated terminal resistor to input SO1.
- The doorbell module with intelligence can be extended with ordinary bell push buttons (max. 5).
- In case of the doorbell module with intelligence, both the flat cable and the RJ45 connector are
connected.
- The RJ45 connector is supplied with a cover cap for protection against damp.
fig.3: connecting the 16-651 to the doorbell with intelligence via the RJ45 connector
3.3. Technical data
Dimensions: .......................................... L 100 x H 50 x W 80mm
Weight:................................................. 399g
Operating temperature: ......................... -20 to 70°C
Enclosure: ............................................ front: enamelled aluminium
Push surface (16-602): ......................... brushed and anodized aluminium
Transparent cover cap (16-601): ............ scratch- and UV-proof polycarbonate
Protection against dust and water: ......... IP44
Connectors: ......................................... 34-pole flat cable: connection to other modules
Contact: ............................................... N.O. max 1A/12V~
EN
RJ45 connector: connection to SMART ONE (16-651)
45