Troubleshooting - The First Years Quiet Expressions Y6228 Manual De Instrucciones

Double Electric Breast Pump
CAUTION: To Avoid Battery Leakage
• Do not attempt to recharge non-rechargeable batteries.
• Be sure to position "+" and "–" symbols as indicated in battery compartment.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (Carbon zinc) or rechargeable (nickel-cadmium) batteries.
• Different types of batteries or new and used batteries are not to be mixed.
• The supply terminals are not to be short-circuited.
• Do not use rechargeable batteries.
• Always remove exhausted batteries from pump.
• Never use a screwdriver or any other tool to pry batteries from compartment, as doing so
may short circuit supply terminals.
• Keep batteries away from children. Parents are urged to exercise care in the storage,
use and disposal of all batteries.
In the European market the dustbin symbol indicates that batteries, rechargeable batteries,
button cells, battery packs, etc. must not be put in the household waste. Batteries containing
hazardous substances are harmful to the environment and to health. Please help to protect the
environment from health risks and tell your children to dispose of batteries properly and take
them to the local collecting points. Batteries are recycled safely in this manner. The chemical
symbols Hg (Mercury), Cd (Cadmium) or Pb (Lead) shown on the dustbin symbol indicates
that the content of that chemical exceeds a certain limit.
16 thefirstyears.com

Troubleshooting

1. Make sure the single ends of the hose fit securely into each 3-way adapter baffle and make
sure the double end of the hose fits securely into pump. If using the pump as a single,
ensure single pump stopper is securely pushed on the end of the unused hose.
2. Make sure AC adapter is plugged into a working outlet and is firmly connected to pump.
3. If operating on DC power (batteries), batteries may be low so try using AC adapter.
4. When operating with batteries, make sure AC power cord is disconnected from pump.
If there is low or no suction:
1. Ensure nipple is properly centered in breast shield.
2. Try increasing the suction setting by pressing the "+" button.
3. Make sure only components supplied are being used.
4. If using as a single pump, ensure single pump stopper is pushed into unused hose end.
If milk is not flowing into bottles:
1. Ensure soft rubber piece on the valve is not stuck to the valve (gently lift the side of the soft
rubber piece). If it is stuck, see "Breast Pump Care" for cleaning instructions.
2. Ensure nipple is properly centered in breast shield.
3. Check that breasts are expressing milk.
If your pump is not working, please call our Parent Service Center: 1–800–704–8697.
Visit us at: thefirstyears.com.
thefirstyears.com 17