HAMPTON BAY E503-WH Guía De Uso Y Cuidado página 10

DPA12122006 新版 SIZE:216x280mm 80g模糙纸 24P 单黑色 骑马钉 2013-4-17 第 10／24页
Press the "Forward" or "Reverse" button on the transmitter
(E) to control the direction of the blades.
PROGRAMMING THE TRANSMITTER AND RECEIVER
NOTE: The dip switch on the receiver does not need to be
manipulated.
Remove the battery compartment door and battery from the
transmitter (E), revealing the dip switch.
Set the transmitter (E) dip switch to the desired setting.
Switch on the main power to activate the receiver.
Within 3 minutes after the power is turned on, press and hold
the transmitter's "ON/OFF" button for 5 seconds.
NOTE: The receiver (F) will issue four short tones to indicate
a successful code match. Afterwards, the fan will automatically
retum to the original speed indicated on the LCD screen.
Press any transmitter (E) button to check for proper functioning.
For code changes, repeat this procedure.
NOTE: The transmitter and receiver will retain the code for
future use (also if switched off).
TRANSMITTER BUTTON DESCRIPTION
1. Fan Speed Buttons: Press the up or down arrow to turn the
fan on or change the speed setting.
2. ON/OFF Button: Press this button to turn the fan off or on.
3. Forward Button: Press this button to turn the fan in the
forward direction (for warm weather).
4. Reverse Button: Press this button to turn the fan in the
reverse direction (for cool weather).
1
3
10
E
Battery Compartment Door
E
2
4