Tabla de contenido
Motor Shaft
Arbre du moteur
Eje del motor
Belt
Courroie
Correa
Motor Shaft
Arbre du moteur
Eje del motor
Carpet/Bare
Floor Selector
Shaft
Arbre d'entraînement
du sélecteur
tapis/plancher
Selector alfombra-piso
Belt
Courroie
Correa
Agitator
Replacing Belt
➢ Replace belt whenever a burning
Belt
rubber smell caused by excessive
Courroie
Correa
slippage occurs.
Agitator
Agitateur
Agitador
➢ Place carpet-bare floor selector in
CARPET position.
➢ Remove lower plate.
➢ Remove agitator by carefully lifting
out.
➢ Remove worn or broken belt.
➢ Loop new belt (Panasonic Type UB8
only) around motor shaft and brush
pulley; see illustration for correct
belt routing.
Belt Groove
Rainure de la courroie
Polea para correa
➢ Clean agitator and reinstall the two
(2) end caps.
➢ Reinstall agitator back into nozzle
housing grooves.
➢ After reinstalling the agitator, turn it
by hand to make sure that belt is not
Agitateur
twisted or pinched and that all
Agitador
rotating parts turn freely.
➢ Reinstall lower plate.
Tabs
Languettes
Lengüetas
- 38 -
Tabla de contenido
