Brush Servicing - Panasonic MC-V9658 Instrucciones De Operación

Base Support Bars
Barres de support de la base
Barra de soporte de la base

Brush Servicing

Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the unit. Failure to do
so could result in electrical shock or per-
sonal injury from cleaner suddenly start-
ing.
TO CHECK BRUSHES:
When brushes are worn to the level
of the base support bar, replace the
brush dowel.
TO REPLACE BRUSH DOWEL
Remove POWER NOZZLE cover,
belt and agitator assembly. (See
"REMOVING BELT").
Remove agitator supports,
washers, screws, end brush, brush
sprocket, and brush sprocket
flange from ends of agitator
assembly.
Replace brush dowel.
Reassemble agitator assembly.
To line up screw holes in dowel,
sprocket and end brush, be sure the
brush portion of end brush lines up
with brushes on brush dowel.
Replace belt, agitator assembly and
POWER NOZZLE cover screws.
(See "REPLACING BELT").
- 44 -
WARNING