TMC Aquarium V2 Skim Pro Manual De Instrucciones página 7

WET SKIMMING
1. Turn water level adjustment dial (7) until the micro-bubbles fill approx 50% of the collection cup cone
(see diagram).
2. Wet foam is produced and rises to the lid then slides down the collection cup cone as wet waste
water. Use of the collection cup drain hose (22) is recommended.
3. The result is a wet foam consisting of diluted waste material. This may condense into a yellow/light
brown liquid.
NOTE: Variables such as introducing new fish or invertebrates into the aquarium, frequent
feeding, adding supplements or medications, fluctuations in water quality, water changes and
maintenance may temporarily alter the performance of the V
USE WITH OZONE
2
V Skim Pro Protein Skimmers and the supplied pump are suitable for use with ozone (although
some components will become brittle with extended ozone exposure and may need to be
checked and replaced periodically).
To use with ozone, simply connect the outlet of the ozone generator to the venturi air silencer
(16), using ozone resistant tubing (not supplied). We highly recommend using a V
Generator for safe ozone dosing.
USEFUL TIP: Although ozone gas enhances the skimming process, should a reduction in skimming
performance be noticed following the addition of an ozone generator there is a good chance
that the ozone generator is either blocked or is limiting the amount of air being drawn into the
venturi injection system. This problem is easily overcome by installing an air pump on the inlet of
the ozone generator, thereby increasing the level of air flowing through the ozone generator.
Caution: Ozone is dangerous and should be used with care. Always refer to the instructions
and safety guidelines of the ozone generator manufacturer.
Collection
Cup Cone
Level of
Micro Bubbles
5
2
Skim Pro Protein Skimmers.
2
Ozone