DermLite II Pro Instrucciones página 3

compliance of the product with the European Medical Device Direc-
tive. Refer to the operator's manual provided with your computer to
ensure that the computer complies with the above standard.
After approximately 1,000 charges, the battery's capacity will dimin-
ish and the battery may need to be replaced. To remove the battery
door (K), push down on the two ovals (L) with your thumbs and slide
the battery door back. Disconnect the small white battery plug, and
remove the battery. Insert a new battery and reconnect the battery
plug. Replace the battery door securely on the device.
The DermLite II Pro uses a special lithium-ion battery, which can
only be purchased from 3Gen or from an authorized 3Gen dealer.
CAUTION: Do not under any circumstances use another battery
other than the one designed for this unit. Doing so could result
in damage to the unit. Also, do not under any circumstances use
another charger other than the one supplied with the unit.
Troubleshooting
Please check our website (www.DermLite.com) for the most cur-
rent troubleshooting information.
If you need to return the DermLite II Pro to 3Gen for servicing,
please call 3Gen prior to returning the device, and a unique Return
Merchandise Number (RMA) will be issued to you.
No Light
Fully recharge the battery and check again. If the condition persists,
send the unit to 3Gen for evaluation and/or repair.
Weak Lighting Recharge the battery.
LED Fails
The LEDs used in the DermLite II Pro are designed to last over
100,000 hours. If any of the 32 LEDs fail, contact 3Gen for repair.
Mechanical Malfunction
Please contact 3Gen to arrange for service.
Care and Maintenance
The DermLite II Pro is designed for trouble-free operation. There
are no adjustments to be made nor is any special servicing re-
quired. Never attempt to open the device for any reason.
Cleaning and Sterilization
The DermLite II Pro body may be cleaned or disinfected by wiping it
with Isopropyl alcohol (70% vol.). Do not use alcohol or disinfectants
in the optical areas of the unit. Do not use abrasive material on
any part of the equipment or immerse the device in liquid. Do not
autoclave.
Cleaning the Lens and the Polarizers
The lens and the polarizing filters should be treated as high quality
photographic equipment and should be cleaned with standard lens
cleaning equipment and protected from harmful chemicals.
Specifications
The patent-pending DermLite II Pro features an innovative optical
microscopy system designed for superb clarity and outstanding
vision.
DermLite II Pro components include:
• Thirty-two 3mm White LEDs
• 25mm Lens with 10x Magnification
• Button-Activated Variable Polarization
• Retractable Faceplate Spacer with 10mm Scale
• Lithium-Ion Battery
Warranty
5 years for parts and labor.
Serial number and company information are located inside the bat-
tery compartment.